Fitting diagram

warning

Using a child safety system which is not approved for this vehicle will not properly protect the baby or child. They risk serious or even fatal injury.

warning

Fitting a seat ISOFIX in the rear right-hand seat means that the middle seat cannot be used. The central seat belt will no longer be either accessible or useable.

Seat which does not allow a child seat to be fitted.

Child seat attached using the mounting ISOFIX

Seat equipped for attaching a ISOFIX or i-Size child seat.

The rear seats are fitted with an anchorage point which allows a front-facing ISOFIX child seat with universal approval to be attached. The anchorage points are located on the bench seatback.

warning

Check that your child is always strapped in and that the belt or safety harness used is correctly set and adjusted.

If necessary, adjust the seat position accordingly.

warning

It is prohibited to fit a child seat in the adjacent available seat when the large seatback is folded down onto the other seats Rear seats.

warning

To install an ISOFIX seat in the rear seats, unfasten the seat belts by hand before engaging the bolts.

Installation table

The table below summarises the information shown on the diagram in order to ensure compliance with current regulations.

Type of child seat

Weight of the child

Size of seat [fixture]

Front passenger seat

Rear side seats

Rear centre seat

With airbag deactivated

With airbag activated

Carrycot fitted across the vehicle

Group 0

< 10 kg

L1 [F]

L2 [G]

X

X

X

X

Rear-facing shell seat

Groups 0 or 0 +

< 13 kg

R1 [E]

X

X

IL (4)

X

Rear-facing seat

Groups 0+ and 1

< to 13 kg and 9 to 18 kg

R3 [C]

X

X

IL (4)

X

R2 [D]

Forward-facing seat

Group 1

9 to 18 kg

F3 [A]

F2 [B]

F2X [B1]

X

X

IUF-IL

(5)

X

Booster seat

Groups 2 and 3

15 to 25 kg and 22 to 36 kg

B3

X

X

IUF-IL

(5)

X

B2

Seat i-Size

Rear-facing seat

X

X

i-U (4)

X

Forward-facing seat

X

X

i-UF (5)

X

Booster seat

X

X

i-UF (5)

X

X = Seat not suitable for fitting child seats.

IUF-IL = Seat enabling a child seat with "Universal/Semi-universal or vehicle-specific" approval to be attached by ISOFIX (on equipped vehicles): check that it can be fitted.

warning

(1) RISK OF DEATH OR SERIOUS INJURY: before fitting a rear-facing child seat in the front passenger seat, check that the airbag has been deactivated Child safety: deactivating, activating the front passenger airbag.

(4) If necessary, position the vehicle seat as far back as possible. Before installing a rear-facing child seat, move the front seat forwards as far as possible then, once the child seat is installed, move the front seat backwards as far as possible without it touching the child seat.

(5) In all situations, remove the headrest of the rear seat on which the child seat is positioned. This must be done before fitting the child seat. Move the seat in front of the child forwards, move the seatback forward to avoid contact between the seat and the child's legs.

The size of the ISOFIX child seat is indicated by a letter:

  • F3, F2, F2X[A, B, B1]: for forward-facing child seats in group 1 (9 to 18 kg);
  • B3; B2: boosters in groups 2 and 3 (15 to 25 kg and 22 to 36 kg);
  • R3, R2[C, D]: rear-facing seats or shell seats in group 0+ (less than 13 kg) or group 1 (9 to 18 kg);
  • R1[E]: rear-facing shell seats in group 0 (less than 10 kg) or 0+ (less than 13 kg);
  • L1,L2[F,G]: carrycots in group 0 (less than 10 kg).

i-U = Suitable for "Universal" front-facing and rear-facing i-Size restraint systems.

i-UF = Suitable only for "Universal" front-facing i-Size restraint systems.