Some seats are not suitable for fitting child seats. The diagram and installation table indicate where to attach a child seat Attachment by seat belt.

The types of child seats indicated may not be available. Before using a different child seat, check with the manufacturer that it can be fitted.

warning

Make sure the child seat or the child's feet do not prevent the front seat from locking correctly Front seats.

Check that when installing the child seat in the vehicle it is not at risk of coming loose from its base.

Always attach the child seat to the vehicle even if it is not in use so that it does not come loose under harsh braking or impact.

In the front seat

The laws concerning children travelling in the front passenger seat differ in every country. Consult the current legislation and follow the indications on the installation table diagram Attachment by seat belt.

Before fitting a child seat in this seat (if authorised):

  • lower the seat belt as far as possible;
  • move the seat as far back as possible;
  • raise the seatback until almost upright;
  • on equipped vehicles, raise the seat base as far as possible.

After installing the child seat, you can move the vehicle seat if necessary. For a rear-facing child seat, do not let it touch the dashboard or move it to the furthest forward position.

Do not change other settings after installing the child seat.

warning

RISK OF DEATH OR SERIOUS INJURY: before fitting a child seat in the front passenger seat, check that the airbag has been deactivated Child safety: deactivating, activating the front passenger airbag.