Journey settings

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections
Interpreting the display selected
522 km
a) distance travelled since the last reset.
5.8 L/100
b) average fuel consumption since the last reset.
The value is displayed after having travelled at least 400 metres since the last reset.
123.4 km/h
c) average speed since the last reset.
The value is displayed after driving 400 metres.

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections
Interpreting the display selected
101 778 km
d) total mileage recorder.
7.4 L/100
e) current fuel consumption.
This value is displayed after a speed of approximately 19 mph (30 km/h) is reached.
541 km
f) estimated range with remaining fuel.
The value is displayed after driving 400 metres.

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections
On-board computer with distance before next service message (continued)
Interpreting the display selected
Service distance
Service in
15 000 km / 12 months
g) distance before service or oil change.
Service distance
With the ignition on, the engine not running and the display set to "Service Intervals", press button 2 or 3 for approximately five seconds to display the distance before service (distance or time to the next service). When the distance or time value approaches its limit, there are several possible scenarios:
  • mileage remaining less than 932 miles (1,500 km) or one month: the "Service due in" message is displayed accompanied by the nearest limit (distance or time);
  • if the range is 0 miles (0 km) or if the service date is reached: the "Service Required" message is displayed accompanied by the warning light.
The vehicle requires a service as soon as possible.
Service due in
300 km / 24 days
Service Required
Reset: to reset the distance before service, press button  3, 4 or 5 for approximately 10 seconds, until the distance before service appears and stays on.
Note: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections
Interpreting the display selected
Tyre pressure: SET (press and hold)
h) reset the tyre pressures.
Refer to the information on the "Tyre pressure monitoring system" in Section 2.