ALPINE MULTIMEDIA SYSTEM

تا امروز

Induction charging area

Introduction

Use the induction charging zone 1 to charge a phone without using a cable.

If the vehicle is equipped, the charging area is indicated by (depending on the vehicle):

  • an associated symbol;

and/or

  • the charging status is automatically displayed on the screen as long as the phone is positioned in the dedicated area.

Its location may vary depending on the vehicle. Please refer to the vehicle user manual for further information.

Note:

  • to enable optimal charging, it is preferable to remove the protective case from your phone before charging;
  • the entire surface of the phone must be aligned with the surface of the charging mat to enable optimum charging.

Charging procedure

Position your phone 2 in the induction zone 1. Charging is automatically started and the charging progress 3 is displayed on the screen.

Phone charging 2 is interrupted in the following cases:

  • an object is detected in the induction charging zone 1;
  • the induction charging zone 1 is overheating. Once the temperature has dropped, your phone's charging procedure 2 will soon restart.

Charging progress

The multimedia system informs you of your telephone 2 charging status 3.

  • charging complete 4;
  • charging in progress 5;
  • object detected in the charging area/object overheating/charging procedure interrupted 6.

Note: the multimedia system will signal if your telephone 2 charging procedure is interrupted.

tip

It is essential not to leave any objects (USB drive, SD card, credit card, start-up card, jewellery, keys, coins, etc.) in the induction charging zone 1 whilst charging your phone. Remove any magnetic cards or credit cards from the phone case before positioning your telephone in the induction charging area 1.

tip

Objects left in the induction charging zone 1 may overheat. You are advised to place them in the areas provided for this purpose (storage compartment, sun visor compartment etc.).