A110
General information
Trip computer and warning system A
Briefly press button 4 or 5 on the stalk 2 repeatedly to scroll upwards or downwards through the following information (the
display depends on the vehicle equipment and country).
- Multifunction screen: briefly press button 3 on the stalk 1 repeatedly to scroll horizontally through the information on this function (refer to "Multifunction screen" in Section 1);
- trip settings: briefly press bouton 3 on the stalk 1 repeatedly to scroll horizontally through the following information:
a) distance travelled;
b) average fuel consumption;
c) average speed;
d) total mileage and trip mileage recorder;
e) current fuel consumption;
f) estimated range;
g) distance before service;
h) reset the tyre pressures;
- trip log, information message readout, operating and warning faults;
- adjust the brightness of the instrument panel;
- from the vehicle settings customisation menu (see "Vehicle settings customisation menu" in Section 1).
These functions are explained on the following pages.
Resetting the journey parameters (reset button)
With one of the trip settings selected, press and hold on button 3, 4 or 5 until the display resets to zero.
Automatic resetting of the journey parameters
Resetting occurs automatically when the maximum value of any of the parameters is
exceeded.
Interpreting some of the values displayed after resetting
The values showing average fuel consumption, range and average speed will become more
stable and reliable the further you travel after pressing the reset button.
For the first few miles after pressing the reset key you will notice that the range
increases as you travel. This range takes into account the average fuel consumption
since the last time the reset button was pressed. Therefore, the average fuel consumption
may decrease when:
- the vehicle stops accelerating;
- the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
- when driving from an urban area onto the open road.