A290
Fuse box
If any electrical component does not work, check the condition of the fuses.
Fuse box A
Unclip the flap 1.
Fuse box B
(depending on the vehicle)
The fuses can be accessed behind the glovebox in the passenger compartment B. Open the glovebox using the opening button.
You will then have direct access to the fuse box 2.
Tweezers 3
Remove the fuse using the tweezers 3 located on the fuse panel.
To remove the fuse from the tweezers, slide the fuse to the side.
It is not advisable to use the free fuse locations.
warning
Check the fuse in question and, if necessary, replace it (replacement fuse must have the same rating as the original.
If a fuse is fitted with too high a rating, it may cause the electrical circuit to overheat (risk of fire) in the event of an item of equipment using an excessive amount of current.
tip
To comply with local legislation or as a precautionary measure:
Obtain an emergency kit containing a set of spare bulbs and fuses from an approved Dealer.
Allocation of fuses
(the presence of certain fuses depends on the vehicle equipment level)
Vehicles not equipped with a fuse allocation label
| Number | Allocation |
|---|---|
| 1 | Rear wiper/rear fog light |
| 2 | Direction indicators |
| 3 | Brake lights |
| 4 | Right-hand rear window control motor |
| 5 | Driver’s side window control motor |
| 6 | Left-hand rear window control motor |
| 7 | Passenger side window control motor |
| 8 | Rear-view mirror ECU - multiplexed door matrix control |
| 9 | Towbar socket communication module |
| 10 | Accessories socket |
| 11 | Instrument panel |